Flashing for changing window installation angle ESA EZA-P EHA-P E_A. The flashing is ideal for the lower fitting of the window with low pitch roof covering of 10° or more. It enables the installation angle to be raised by an additional 10°. Is used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic. It is commonly used to install with single windows in roof slopes. The flashing is also used in modules for horizontal joining of the windows, (in such combinations a distance of 20cm between the windows is required).
There are three flashing type available, the use of which is dependent on the roof covering:
- ESA flashing–a flat covering with a profile depth of 10 mm (2 x 5 mm),
for use with slates and similarly flat roof coverings.
- EZA-P flashing–a profiled covering up to 45mm,
for use with roof tiles and profiled sheeting.
- EHA flashing–a profiled covering up to 90mm,
for use with roof tiles, corrugated and deep profiled sheeting.
Can be used on roofs with pitches between 10° and 75°. Not for use on Forticrete Centurion tiles.